AC-DC DUAL OUTPUT

D-30 SERIES
¡¡
  • Low price and high reliability
  • 105¡æ output capacitor
    ¡¡
  • AC input power suitable for the world
    ¡¡
  • High efficiency and low operation temperature
    ¡¡
  • Soft-start current can reduce the AC input impact effectively
    ¡¡
  • With short-circuit and overload protection
    ¡¡
  • 100% full-load burning test
    ¡¡
  • Installed with EMI filter,minimum wave
  • ¡¡

    Model

    ¡¡
    Performance
    D-30A D-30B
    CH1 CH2 CH1 CH2
    DC output voltage 5V 12V 5V 24V
    Output voltage error(Note:2) ¡À2% ¡À1% ¡À1% ¡À1%
    Rated output current 4A 1.3A 2.2A 1A
    Output current rage 0.5-4A 0-1.3A 0-4A 0.1-1A
    Wave and noise(Note:3) 50mVp-p 50mVp-p 50mVp-p 100mVp-p
    Inlet stability(Note:4) ¡À0.5% ¡À0.5% ¡À0.5% ¡À1%
    Load stability(Note:5) ¡À0.5% ¡À0.5% ¡À0.5% ¡À4%
    DC output power 32W 75W
    Efficiency 72% 74%
    Adjustable range for DC voltage CH1+10,-5% CH1+10,-5%
    Range for input voltage 85~132VAC/170~264VAC; switch choice47~63Hz;240-370VDC
    Input current 0.86A/115V 0.45A/230V
    Impact current Cool-start current :18A/115V 36A/230V
    Leakage current <0.5mA/240VAC
    Overload protection 105%~150% TYPE:FOLDBACK Current limit reset:self-reset
    Over-voltage protection ¡­¡­
    High-temperature protection ¡­¡­
    Temperature factor ¡À0.03%¡æ(0~50¡æ) ON+5V OUTPUT
    Start,rise and lock time 200ms,50ms,30ms
    Vibration resistance 10~50Hz,2G10min/1cycle time 60 minutes for each shaft
    Resistance to pressure Input and output internal:3KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC
    Isolation resistance Input and output internal,input and enclosure,Output and enclosure:500VAC/100M Ohms
    Operating temperature and humidity -10¡æ~+60¡æ£¬20%~90%RH
    Store temperature and humidity -20¡æ~+85¡æ,10%~95RH
    Overall dimension 129*98*35mm
    Weight 0.4Kgs
    Safety standard Meet UL1012
    EMC standard ......
    Note:1.The testing condition for the parameter above is :230VAC input,rated load, 25¡æ 70% RH.Humidity
    ¡¡¡¡ 2.Error.include the setting error,line stability and load stability.(Note:5)
    ¡¡¡¡ 3.Wave test:adopting A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting.
    ¡¡¡¡ 4.Inlet voltage stability test:when is over load, the lowest voltage of inlet is up to the highest voltage.
    ¡¡¡¡ 5.Load stability test:The load is from 0% to 100%
    D-50 SERIES
    ¡¡
  • Low price and high reliability
  • 105¡æ output capacitor
    ¡¡
  • AC input power suitable for the world
    ¡¡
  • High efficiency and low operation temperature
    ¡¡
  • Soft-start current can reduce the AC input impact effectively
    ¡¡
  • With short-circuit and overload protection
    ¡¡
  • 100% full-load burning test
    ¡¡
  • Installed with EMI filter,minimum wave
  • ¡¡

    Model

    ¡¡
    Performance
    D-50A D-50B
    CH1 CH2 CH1 CH2
    DC output voltage 5V 12V 5V 24V
    Output voltage error(Note:2) ¡À2% ¡À5,-8% ¡À2% ¡À8%
    Rated output current 6A 2A 6A 1A
    Output current rage 1-6A 0.3-2A 1-6A 0.2-1A
    Wave and noise(Note:3) 50mVp-p 100mVp-p 50mVp-p 100mVp-p
    Inlet stability(Note:4) ¡À0.5% ¡À1% ¡À0.5% ¡À1%
    Load stability(Note:5) ¡À0.5% ¡À0.5% ¡À0.5% ¡À8%
    DC output power 54W 54W
    Efficiency 73% 73%
    Adjustable range for DC voltage CH1+10,-5% CH1+10,-5%
    Range for input voltage 85~132VAC/170~264VAC;switch choice 47~63Hz;240-370VDC
    Input current 1.3A/115V 0.65A/230V
    Impact current Cool-start current 18A/115V 36A/230V
    Leakage current <0.5mA/240VAC
    Overload protection 105%~150% TYPE:FOLDBACK Current limit reset:self-reset
    Over-voltage protection ¡­¡­
    High-temperature protection ¡­¡­
    Temperature factor ¡À0.03%¡æ(0~50¡æ) ON+5V OUTPUT
    Start,rise and lock time 200ms,50ms,30ms
    Vibration resistance 10~500Hz,2G 10min./1cycle,time60·Ö,minutes for each shaft
    Resistance to pressure Input and output internal:1.5KVAC, Input and enclosure:1.5KVAC, Output and enclosure:0.5KVAC
    Isolation resistance Input and output internal, input and enclosure, Output and enclosure:500VAC/100M Ohms
    Operating temperature and humidity -10¡æ~+60¡æ 20%~90%RH
    Store temperature and humidity -20¡æ~+85¡æ,10%~95%RH
    Overall dimension 159*97*38mm
    Weight 0.52Kgs
    Safety standard Meet UL1012
    EMC standard ¡­¡­
    Note:1.The testing condition for the parameter above is :230VAC input,rated load, 25¡æ 70% RH.Humidity
    ¡¡¡¡ 2.Error.include the setting error,line stability and load stability.(Note:5)
    ¡¡¡¡ 3.Wave test:adopting A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting.
    ¡¡¡¡ 4.Inlet voltage stability test:when is over load, the lowest voltage of inlet is up to the highest voltage.
    ¡¡¡¡ 5.Load stability test:The load is from 0% to 100%
    D-60 SERIES
    ¡¡
  • Low price and high reliability
  • 105¡æ output capacitor
    ¡¡
  • AC input power suitable for the world
    ¡¡
  • High efficiency and low operation temperature
    ¡¡
  • Soft-start current can reduce the AC input impact effectively
    ¡¡
  • With short-circuit and overload protection
    ¡¡
  • 100% full-load burning test
    ¡¡
  • Installed with EMI filter,minimum wave
  • ¡¡

    Model

    ¡¡
    Performance
    D-60A D-60B
    CH1 CH2 CH1 CH2
    DC output voltage 5V 12V 5V 24V
    Output voltage error(Note:2) ¡À2% ¡À6% ¡À2% ¡À5%
    Rated output current 46A 3A 3A 1.8A
    Output current rage 0.3-6A 0.2-4A 0.3-6A 0.2-2.2A
    Wave and noise(Note:3) 75mVp-p 150mVp-p 75mVp-p 150mVp-p
    Inlet stability(Note:4) ¡À0.5% ¡À1% ¡À0.5% ¡À0.5%
    Load stability(Note:5) ¡À0.5% ¡À4% ¡À0.5% ¡À4%
    DC output power 56W 58W
    Efficiency 73% 76%
    Adjustable range for DC voltage CH1+10,-5% CH1+10,-5%
    Range for input voltage 85~264VAC 47~63Hz;120-370VDC
    Input current 2A/115V 1A/230V
    Impact current Cool-start current 30A/115V 60A/230V
    Leakage current <1A/240VAC
    Overload protection 105%~150% TYPE:PULSING HICCUP SHUTDOWN RESET: Current limit reset:self-reset
    Over-voltage protection ¡­¡­
    High-temperature protection ¡­¡­
    Temperature factor ¡À0.03%¡æ(0~50¡æ) ON+5V OUTPUT
    Start,rise and lock time 800ms,50ms,10ms/115VAC 300ms,50ms,80ms/230VAC
    Vibration resistance 10~500Hz,2G 10min./1cycle,time60·Ö,minutes for each shaft
    Resistance to pressure Input and output internal:1.5KVAC, Input and enclosure:1.5KVAC, Output and enclosure:0.5KVAC
    Isolation resistance Input and output internal, input and enclosure, Output and enclosure:500VAC/100M Ohms
    Operating temperature and humidity -10¡æ~+60¡æ 20%~90%RH
    Store temperature and humidity -20¡æ~+85¡æ,10%~95%RH
    Overall dimension 159*97*38mm
    Weight 0.55Kgs
    Safety standard Meet UL1012 TUV(En55022) CLASS B, IEC801-2,3,4 IEC555-5
    EMC standard ¡­¡­
    Note:1.The testing condition for the parameter above is :230VAC input,rated load, 25¡æ 70% RH.Humidity
    ¡¡¡¡ 2.Error.include the setting error,line stability and load stability.(Note:5)
    ¡¡¡¡ 3.Wave test:adopting A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting.
    ¡¡¡¡ 4.Inlet voltage stability test:when is over load, the lowest voltage of inlet is up to the highest voltage.
    ¡¡¡¡ 5.Load stability test:The load is from 0% to 100%
    D-120 SERIES
    ¡¡
  • Low price and high reliability
  • 105¡æ output capacitor
    ¡¡
  • AC input power suitable for the world
    ¡¡
  • High efficiency and low operation temperature
    ¡¡
  • Soft-start current can reduce the AC input impact effectively
    ¡¡
  • With short-circuit and overload protection
    ¡¡
  • 100% full-load burning test
    ¡¡
  • Installed with EMI filter,minimum wave
  • ¡¡

    Model

    ¡¡
    Performance
    D-120A D-120B
    CH1 CH2 CH1 CH2
    DC output voltage 5V 12V 5V 24V
    Output voltage error(Note:2) ¡À2% ¡À6% ¡À2% ¡À7%
    Rated output current 12A 5A 6A 4A
    Output current rage 2-12A 0.5-5A 2-10A 0.4-4A
    Wave and noise(Note:3) 60mVp-p 120mVp-p 60mVp-p 150mVp-p
    Inlet stability(Note:4) ¡À0.5% ¡À1% ¡À0.5% ¡À1%
    Load stability(Note:5) ¡À0.5% ¡À5% ¡À0.5% ¡À6%
    DC output power 120W 126W
    Efficiency 78% 80%
    Adjustable range for DC voltage CH1:+10.5% CH1:+10.5%
    Range for input voltage 88~264VAC/180~264VAC BY SWITCH 47~63Hz;248~370VDC
    Input current 2.5A/115V 1.25A/230V
    Impact current COOL-START CURRENT
    Leakage current <3.5mA/240VAC
    Overload protection 105%¡«135% TYPE CUT OFF OUTPUT RESET:SELF-RESET
    Over-voltage protection CH1:5.75V~6.75V
    High-temperature protection ------
    Temperature factor ¡À0.03%¡æ(0~50¡æ) ON +5V OUTPUT
    Start,rise and lock time 200ms,50ms,20ms
    Vibration resistance 10~500Hz,2G 10min./1cycle,time60,minutes for each shaft
    Resistance to pressure Input and output internal:1.5KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC
    Isolation resistance Input and output internal,input and enclosure,Output and enclosure:500VAC/100M Ohms
    Operating temperature and humidity -10¡æ~+50¡æ,20%~90%RH
    Store temperature and humidity -20¡æ~+85¡æ,10%~95%%RH
    Overall dimension 199*110*50mm
    Weight 0.85Kgs
    Safety standard UL1950,TUV EN60950
    EMC standard IEC8012-3,4, IEC555-2
    Note:1.The testing condition for the parameter above is :230VAC input,rated load, 25¡æ 70% RH.Humidity
    ¡¡¡¡ 2.Error.include the setting error,line stability and load stability.(Note:5)
    ¡¡¡¡ 3.Wave test:adopting A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting.
    ¡¡¡¡ 4.Inlet voltage stability test:when is over load, the lowest voltage of inlet is up to the highest voltage.
    ¡¡¡¡ 5.Load stability test:The load is from 0% to 100%
    ¡¡¡¡ 6.C3,4 must be knocked down.