GAS DETECTOR

¡¡

(Combustible Gas Detector, Refrigerant Leak Detector, Natural Gas Detector, Gas Leak Detector, Gas Leakage Detector)

¡¡

HSTBX166   Pen-type Gas Detector   (for private/commercial application)
Brief Introduction:
HSTBX166 series gas detector is specially used for detecting combustible gas leakage. With high-sensitivity and reliable catalytic gas sensor, it is suitable to home, industrial and other environment with methane and propane combustible gas.
The detector has the visual and audible indication for fault, low battery and alarm. It has fashionable appearance, easy to carry and operate.

Features:
-Auto zero calibration
-Fast response and resume
-Easy to operate
-Variety sound for different alarms
-Small zero drift and wide range of operating temperature

Specifications:
-Detecting gas: combustible gas like natural gas, LPG etc.
-Detecting range: 0¡«100%LEL
-Sampling: natural diffusion
-Working condition: Temperature: -20¡«55¡æ Humidity: <95%RH
-Operating voltage: DC3V (two 1.5V AA battery)
-Working current: 139mA
-Alarming level:Low alarm: (20¡À5) %LEL¡¡ High alarm: (50¡À10) %LEL
-Response time: <5s
-Alarm method: Visual and audible alarm
-Alarm sound: ¡Ý65dB
HSTBX169   Pen-type Gas Detector    (for private/commercial application)
Features:
-Low consumption and high sensitivity
-Combined with advanced electronic technology and superior craft
-Indication of power, voltage, fault and alarm
-MCU control

Specifications:
-Detecting gas: combustible gas like LPG, natural gas etc.
-Detecting Range: 0¡«100%LEL
-Sampling: natural diffusion
-Working Condition: Temperature -40¡«70¡æ Humidity £¼95%RH
-Working Voltage: DC3V (2pc 1.5VAA battery)
-Normal battery life: 5 hours
-Working current: ¡Ü170mA
-Alarming level: Low-alarm 10%LEL High-alarm: 30% LEL (can be specified)
-Alarm type: audible and visual
-Alarm sound: >40dB
-Response time: <10s
-Resume time: <30s
-Dimension: ¦µ 183 X18mm
-Weight: about 160g £¨including battery£©
HSTJL269 Portable Gas Detector with Gooseneck   (for industrial/detecting application)
Brief Introduction:
HSTJL269 gas detector for industrial use has a high performance and wide detecting range. It can be used to detect methane, natural gases, propane, LPG, Hydrogen and other combustible gases and find the gas leaking point easily.

Features:
-Calibration-free on gas sensor
-Quick response to combustible gas leakage
-Long and flexible gooseneck tube
-Adjustable sensitivity
-30-level LED / tricolor show
-Battery low voltage alert
-Sensor fault self test

Specifications:
-Detecting Gas: Natural gas, LPG
-Sensitivity: better than 50ppm
-Detection range:
Green LED: 500ppm---10000ppm
Yellow LED: 1000ppm---100000ppm
Red LED: 2000ppm----200000ppm
-Working condition: Temperature. -40¡æ¡«70¡æ Humidity: ¡Ü95% RH
-Warm-up time: <20S
-Response time: <10S
-Indication: 30 levels of LED indication
Green: low concentration
Yellow: middle concentration
Red: high concentration
-Alarming levels: The shorter the frequent buzzer sound, the higher the concentration reach
-Power supply: Ni-H chargeable battery DC3.6V 1600mAh
-Charge time: 4¡«6 hours
-Using time of the battery: >8h
-Weight: about 310g
-Dimensions: L*W*H 170mm¡Á62mm¡Á26mm

HSTGPT100 Portable Gas Detector with Gooseneck   (for industrial/detecting application)

¡¡

Brief introduction:

  • Intrinsically safe gas detection equipment

  • Can detect gas leakage of many combustible gases on many spots

  • Suitable for using near the pipelines and a valve where there is possibly gas leakage and explosion-proof is required

  • With GPS function, convenient to record the exact area of the gas leakage and to make detailed record on the maintenance of the pipeline

  • With excellent imported semi-conductor gas sensor, has good sensitivity; with built-in MCU and friendly operation interface, operation is easy, function is complete, performance is reliable, has multi self adaptation functions

  • With high distinguishing rate STN lattice LCD, the indication is so clear

  • With high-intention plastic and multriple anti-slip rubber, the housing has high intention Handle, waterproof and dustproof

Functions and features:

  • With advanced and lower-consumption 16 digit MCU

  • High distinguishing rate STN lattice LCD

  • Adjustable sensitivity and zero point when detecting gas leakage

  • High-level protection function of the gas sensor

  • Self-testing function and self-resume function

  • Battery low voltage alert

  • Standard Beijing time indication

  • Auto zero calibration, easy to calibrate it

  • Intrinsically safe

  • Technical data:

    • Detection range: (0 to 10,000) ppm (for CH4)

    • Target gas: combustible gas

    • Response time: T<5s

    • Indication way: LCD and digital indication

    • Audible indication

    • Working condition: Temperature: -20 to 60 deg. C

    • Humidity: <95% RH No con.

    • Working voltage: DC 3.6V/2100mAh Lion battery

    • Charging time: 4 to 6 hours

    • Working time: 12 to 70 hours

    • Life of gas sensor: 2 years

    • Protection grade: IP54

    • Weight: approximately 300g (battery included)

    • Dimensions: 170 x 77 x 33mm

HSTBX170-LCD with ATEX  single gas detector (for industrial/monitoring application)
Brief Introduction:
HSTBX170 portable single gas detector can make continuous detection to combustible and toxic gases. It is suitable for combustible and toxic gas leakage detection in underground pipe or mines, and keeps the workers safe, prevents the facilities from being destroyed.
The detector, adopting excellent-quality sensor, makes detection in the way of natural diffusion. It has good sensitivity and reproducibility. The detector adopts embedded MCU controller, easy to operate.
The shell adopts special high strength material and anti-smooth rubber, with the characters of water-proof and dust-proof.

Features:
-Advanced MCU control with low power consumption;
-Low and high alarm level;
-Adjustable calibrating level;
-Excessive high concentration protection function;
-High concentration protection for combustible gas;
-Self test for the combustible gas sensor;
-Low battery indication;
-Replaceable sensor module;
-Self-adjustment function
-Visual and audible alarm with vibration;
-STEL and TWA alarming for toxic gases
-Advanced self-examination and self-renovation function
-Password management to avoid wrong operation;
-Explosive proof housing

Specifications:
-Gas Detected:combustible gas(CH4,C3H8,H2)and toxic gas, oxygen, Other rare toxic
gas like ammonia, NO, PH3, NH3, NO2, HCN, SO2 etc also available,Can be specified by
the Customer in advance.
-Accuracy:¡Ü¡À5% F.S. Response time:T<30s
-Indication:LCD indicates the time and state
-Indication of alarm, fault and low voltage with LED, sound, vibration
-Operating Environment:
Operating temperature -40¡æ¡«70¡æ (for combustible gas)
Operating temperature: -20¡æ¡«50¡æ (for toxic gas)
-Humidity: < 90%RH non-condensing
-Operating voltage: DC3.6V Li battery; 1200mAh
-Working time: Combustible gas: ¡Ú 8h continuously Toxic gas: ¡Ú300h continuously
-Charging time: 4h¡«6h
-Sensor life: 2 years Protection category: IP65
HSTBX172    Portable single gas detector   (for industrial/monitoring application)
Brief Introduction:
HSTBX172 portable gas detector can make continuous detection for combustible and toxic gases. It is suitable for combustible and toxic gas in underground pipe or mines, keeping your work safely and profitably.
With pump sampling and different length of sampling probes, it is convenient for detecting in different environment. The high and low alarm levels are adjustable (STEL and TWA alert for toxic gas). User can turn on or off the vibration alarm function when necessary. When gas concentration reaches or exceeds the preset alarming level, it will give visible and audio alarm, and backlit is activated automatically. The relative indication help user realize the alarming type. The mark in the LCD makes the operation simple and convenient.

Features:
-Advanced 16 digit MCU control
-Large LCD display
-Built-in pump to sampling, could sample test from long distance
-Low and high alarm can be specified display alarm type
-Display STEL and TWA level
-Supply time and remain battery level display
-Replaceable sensor module
-2000 pieces records, including peak value, type, could auto cover when it full
-Could connect with computer and output data, and analyses the results
-Two alarming level, three ternary alarming (visible audio and vibration)
-Power on and self-test function, sensor, visible, audio and vibration information
-Password management and password validation for important operation

Specifications:
-Safe degree: Intrinsically safe
-Sampling: pump sampling
-Sensor: Catalytic or electrochemical
-Gas: Combustible or toxic gas
-Response time: T<30s
-Operating condition: Temperature -40¡æ¡«70¡æ for combustible gas
-Temperature: -20¡æ¡«50¡æ for toxic gas
-Humidity: < 90%RH non-condensing
-Protection category:IP65
-Battery: DC3.7V, 2.1AH, Li battery
-Working time: 8 hours continuously for catalytic gas sensor
-48hours continuously for electrochemical gas sensor
-Charging time:(4¡«6)h
HSTBX258   Portable Two-gas Detector    (for industrial/monitoring application)
(Gas and CO, H2S, O2 optional)
Features:
-Colorful screen indication
-Excessive high level protection
-Replaceable sensor module
-Self-adjustment function
-Intrinsically-safe &explosive-proof

Specification:
-Sensor: Catalytic or electrochemical
-Detecting Gas: Flammable Gas, H2, CO, H2S, O2, etc.
-Alarming: Can be specified
-Accuracy: ¡À5% F.S
-Response Time: <30s
-Indication: Audio, Visual, Vibration alarm;
-Working Condition: Tem. -40¡æ¡«70¡æ; Hum. £¼90%RH
-Working Voltage: DC3.6V Li-ion battery; 1200mAh
-Charging Time: 3h¡«5h
-Working Time: ¡Ý8h continuously
-Life of Sensor: 2 years
-Protection Degree: IP65
-Weight: 200g (Battery included)
-Dimension: 110mm¡Á60mm¡Á40mm
HSTBX616  Portable multi-gas detectors    (for industrial/monitoring application)
Features:
Color LCD display
High-concentration protection and fault self-test
Indications of time, power and low battery
Replaceable sensor module
Auto calibration
Alarm point and calibrating point can be adjusted, auto calibrating point can be set by computer
Detecting activation mode and calibrating activation mode, avoiding wrong operation
Two alarm points with audible, visual and vibrating indication
Serial communication
One button operation, easy to operate
Double rubber craftwork, anti-slip, strength to endure

Specifications:
Detecting method: diffusion or pump (optional)
Indication: color LCD display
Operating environment:
Temperature: -20 to 50 degrees
Humidity: ¡Ü95% RH
Operating power: 3.6V DC lithium battery
Working time: <8 hours
Explosion-resistant grade: Exia II CT3
Protection category: IP65
Weight: about 200g (including battery)
Dimensions: 65 x 110 x 30mm

Applications:
Oil and gas, steel refinery industry
Coal mine
Communication, chemical
Underground coal mine, pipeline and explosive area
HSTJL368   Push Cart Type Pipeline Gas Detector    (for industrial/detecting application)
Brief Introduction:
This detector adopts advanced semiconductor/hot-wire gas sensor. You only need to open the power switch and adjust the sensitivity, and then you can push it on the ground to detect the leakage easily. According to the gas concentration, the detector will give variable alarm. With the bright 30-level leakage LED, it's more convenient for you to find the leakage source in a noisy place or at night correctly.

Specifications:
-Detecting Gas: Natural gas or LPG
-Sensitivity: 50ppm
-Range:
1.) 0¡«300ppm
2.) 300ppm¡«3000ppm
3.) 3000ppm¡«30000ppm
-Warm-up time: 10s
-Response time: ©‚10s
-Visual Indication: 18 level LED, Green: Low level; Yellow: Middle level; Red: high level
-Audio Indication: The higher frequent buzzer sound, the higher concentration reach.
-Battery: 12 V Lead-acid rechargeable battery
-Working time: ©ƒ8h
-Charging time: ¡Ü10h
-Dimension: 1100mm¡Á230mm¡Á280mm
-Weight: 5.36©K
-Working condition: Temperature:-10¡æ¡«60¡æ Humidity:£¼95% (no con.)
-Ambient wind Speed: ©‚2m/s
-Gas flux: 1L/min

 ( If you need user manual or E-catalogue for above meters, please ask for at: xiushunjie@gmail.com )